BANCORD™ Round Belt
Number:
Category:
Details Description
■ Conveyor belt length is customizable
It can be joined simply and securely by heating, allowing conveyor belts of the desired length to be produced in a very short time.
“Because the conveyor belt length can be freely selected without being constrained by standard specifications, it enables designs that maximize the machine’s performance.”
■ Multi-axis drive—capable of three-dimensional motion (circular conveyor belt)
The cross-section is non-directional, enabling multi-axis transmission and complex three-dimensional motion with direction changes achieved via idler pulleys.
■ Easy to install and manage
Installation can be performed without disassembling the machinery, and there are fewer tedious management tasks such as tension adjustment.
■ Excellent mechanical properties
Use BANCOLLAN, which boasts excellent wear resistance and tear strength. TM (Polyurethane), therefore, industrial materials primarily based on conveyor belts can be widely applied.
Use Case
 |
 |
 |
 |
※For ease of understanding, the conveyor belt is depicted in green or light green. This does not match the actual color of the conveyor belt.
| Product Series | Features and Main Applications | of the lightweight conveyor belt | ||||||||||||||||||||||||||||||||
| Variety | Cooperation | Product photo | Examples of Use (Applicable) | Color tone | Section diameter (mm) | |||||||||||||||||||||||||||||
| 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 15 | SUNLINETM conveyor belt | |||||||||||||||||||
| Round belt | #480 | General, Food conveyance |
Orange | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ||||||||||||||||
| #485N | Roller type Conveyor drive |
Translucent | - | - | - | ○ | - | ○ | ○ | ○ | - | - | - | - | - | - | - | The choice of | About conveyor belts | |||||||||||||||
| #485RB | Paper, Food conveyance※1 |
Green | - | - | - | - | - | ○ | ○ | ○ | - | ○ | - | - | - | - | - | Purpose | Food conveyance | |||||||||||||||
| #489 | Wear-resistant (High load) |
white | ○ | ○ | - | ○ | - | ○ | ○ | ○ | - | ○ | - | ○ | - | ○ | - | Transportation purpose | Logistics, general | |||||||||||||||
| Roll length | #480, 200 m per roll #485N, 100 m per roll each #485RB, 100 m per roll #489 100 m per roll |
100 m per roll | Purpose | Special Transport | ||||||||||||||||||||||||||||||
| ※1 Surface Roughness Specification | ||||||||||||||||||||||||||||||||||
| ※ Customized joining processing is available upon request. (For wire diameters of 15 mm, this applies only to coiled products.) |
||||||||||||||||||||||||||||||||||
| The allowable circumferential overlap shall be no less than 125 mm when the wire diameter is 2.5 mm or less, and no less than 50 times the wire diameter when the wire diameter is 3 mm or greater. | ※ Complies with Ministry of Health, Labour and Welfare Notification No. 370 concerning food hygiene. | |||||||||||||||||||||||||||||||||
| ※ For lead times and batch information regarding made-to-order colored products, please contact our sales department or authorized retailers. | ※ For inquiries regarding φ15 fittings, please contact our sales department or authorized dealers. | |||||||||||||||||||||||||||||||||
| About pulleys | PS flat belt TM BANCORD TM Round belt Glossary |
|||||||||||||||||||||||||||||||||
| Section diameter (mm) | Minimum pitch diameter of the pulley (mm) | Section diameter (mm) | Minimum pitch diameter of the pulley (mm) | |||||||||||||||||||||||||||||||
| 1.5 | 12 | 8 | 63 | |||||||||||||||||||||||||||||||
| 2 | 17 | 9 | 69 | |||||||||||||||||||||||||||||||
| 2.5 | 20.5 | 10 | 80 | |||||||||||||||||||||||||||||||
| 3 | 23 | 11 | 91 | |||||||||||||||||||||||||||||||
| 3.5 | 26 | 12 | 107 | |||||||||||||||||||||||||||||||
| 4 | 29 | 15 | 143 | |||||||||||||||||||||||||||||||
| 5 | 40 | M-shaped | 50 | |||||||||||||||||||||||||||||||
| 6 | 46 | A-shape | 75 | |||||||||||||||||||||||||||||||
| 7 | 52 | B-shaped | 125 | |||||||||||||||||||||||||||||||
| ※ When the diameter of the pulley used is smaller than the minimum pulley diameter, bending fatigue increases, thereby reducing the service life of the conveyor belt. | ||||||||||||||||||||||||||||||||||
Round belt
| Cross-sectional diameter (mm) | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 15 | |||||||||||||
| Tensile strength (N/strand) | 60 | 100 | 160 | 230 | 310 | 410 | 640 | 930 | 1150 | 1500 | 1900 | 2360 | 2850 | 3390 | 5300 | |||||||||||||
Water resistance
BANCORD™ can be used for extended periods even in high-humidity environments.
| Time-dependent change in tensile strength in water (Material #489) | ||||||||||||||||||||||||||
| Soaking days (days) | 20 | 30 | 50 | 70 | ||||||||||||||||||||||
| Residual Strength Ratio (%) | 99 | 98 | 96 | 91 | ||||||||||||||||||||||
| ※ The sample was used after being soaked in water at 40°C to a strain of 5%. | ||||||||||||||||||||||||||
Oil-resistant · Chemical-resistant
| Oil · Chemicals | Can it be used? | ||||||||||||||||||||||||
| Oil Resistance ASTM No. 1 | ○ | ||||||||||||||||||||||||
| Oil resistance ASTM No. 3 | ○ | ||||||||||||||||||||||||
| Acid resistance: 10% hydrochloric acid | ○ | ||||||||||||||||||||||||
| Alkali resistance: 10% sodium hydroxide | △ | ||||||||||||||||||||||||
| Organic solvent resistance Acetone | × | ||||||||||||||||||||||||
| Organic solvent resistance Gasoline | × | ||||||||||||||||||||||||
| Organic solvent resistance Methanol | △ | ||||||||||||||||||||||||
| ※ In general, avoid using this product in strong acids, strong bases, aromatic hydrocarbons (such as benzene and toluene), ester solvents (such as ethyl acetate), and ketone solvents (such as MEK and acetone). | |||||||||||||||||||||||||
| Terms of Use | Precautions for Storage and Transportation | ||||||||||||||||||||||||||||||||||||
| Category | Project | ● When handling or using heavy-duty conveyor belts or pulleys, please use equipment capable of withstanding their… | PS Flat Belt TM BANCORDTM Round Belt Glossary of Terms | ||||||||||||||||||||||||||||||||||
| Round belt | Conveyor belt tension ratio | 3–7% (typically 5%) | Lifting equipment and devices for handling weights. If carried by hand, it may… | ||||||||||||||||||||||||||||||||||
| Use with wheels | BANCORD™ Pulleys for Round Belts | It can lead to injuries such as lower back pain. | |||||||||||||||||||||||||||||||||||
| Contact angle of the small pulley | 180° | ● Do not forcibly bend the conveyor belt, nor place heavy objects on it for transport or | |||||||||||||||||||||||||||||||||||
| Conveyor belt speed | #480 ·485N ·485RB: 2–12 m/s #489: 2–20 m/s |
Storage. Otherwise, it may lead to conveyor belt failure or damage, resulting in premature wear. | |||||||||||||||||||||||||||||||||||
| Bad. | |||||||||||||||||||||||||||||||||||||
| Operating temperature | 0–50°C | ● Please store the product in a location with a temperature between -10°C and 40°C and low humidity. | |||||||||||||||||||||||||||||||||||
Keywords:
belt
Service Hotline
Dongguan Office
Sales Manager I Chen Taicheng
Tel: +86 136-8616-9720
Email: tyler_chen@kaixingbelt.com
Sales Manager II Chen Taichun
Tel: +86 133-166-99806
Email: ted_chen@kaixingbelt.com
Address: No. 168, Daliang Fuli East Road, Daliang Town, Dongguan City, Guangdong Province
Juntai Zhengtuo 5G Industrial Park, Building 1, 5th Floor
Taiwan Office
Sales Manager I Chen Taiyu
Tel: (+886)-956-034-291/(+886)-2-2809-9853
Email: kxtwalex@gmail.com
Address: 1st Floor, No. 26, Zili Road, Danshui District, New Taipei City
Scan to identify and browse
Mobile Website
Copyright © 2025 Dongguan Kaixing Industrial Co., Ltd.
Privacy Policy SEO City Substation Website: 300.cn Dongguan